Sheet Metal Processing Technology

Frist, the standardized sheet metal processing standard principles.

1. No tools, fixtures and workpieces should be placed on top of the lathe or on top of the gearbox during sheet metal processing. You need to concentrate your mind during the construction time. No fatigue, chatting, multiple people and smoking are allowed.

2. In order to prevent the chippings from touching people, a transparent baffle should be placed in a suitable place.

3. When cutting, it is necessary to use hooks to solve the long chips like strip chips and sheet metal processing as soon as possible, and not to pull by hand.

4. When grinding the exterior of the parts with gauze, the tool should be moved to a safe place and care should be taken not to let hands and clothes touch the exterior. When grinding the holes inside, you should not use your fingers to support the gauze, you should use other items instead, and the speed should not be too fast.

Second, do a good job in cleaning the sheet metal processing.

1. It is necessary to rinse the surface of the sheet metal processing parts with water to remove the dirt on its surface.

2. Then add soap, liquid detergent or 5% ammonia solution for wiping.

3. Rinse carefully with water again.

4. Dry the water stains left on the exterior of the sheet metal processing parts. In the process of drying, we should scrub in the same direction in order to scrub more cleanly, and let its exterior dry naturally after the scrubbing is completed.