Maintenance advice for bending

Bending is a metalworking technique used to form bends or folds in metal materials. The following are maintenance recommendations for bending:

1) Cleaning: Clean the bending machine and its surrounding area regularly to ensure that there is no accumulation of dust, grease or other impurities. Surfaces can be wiped with a soft cloth and stubborn stains can be removed with specialised cleaners.

2) Lubrication: Regularly inspect and lubricate the moving parts of the bending machine, such as the slides, guides, chains, etc. Use appropriate lubricants and follow the manufacturer's recommendations.

3) Adjustment and calibratio: The bending machine requires periodic adjustment and calibration to ensure proper operation and accuracy. Refer to the manufacturer's operating manual and follow the instructions for adjustment and calibration.

4) Preventive maintenance: Replace worn or damaged parts in a timely manner so that the performance of the bending machine is not affected. Periodically check that wires, sensors and other critical components are securely connected and that the electrical system is functioning properly.

5) Training and Safety: Ensure that operators are properly trained and follow the relevant safety operating procedures. When using the bending machine, it is important to wear appropriate personal protective equipment such as gloves and goggles.

Please note that the above are general recommendations and that specific maintenance requirements may vary depending on the model and manufacturer of the bending machine. It is best to refer to the relevant operating manual or consult a professional technician for accurate maintenance advice.