Installation procedure for bending

1. Preparation: Make sure you have all the tools and materials you need, such as bending machines, bending molds, screwdrivers, etc.

2. Install the bending machine: According to the bending machine instruction manual or operation manual, place the bending machine in the appropriate position to ensure that it is stable. Connect the power supply and make necessary adjustments.

3. Install the bending mold: select the appropriate bending mold, and install it correctly on the bending machine according to the size and shape of the mold. Ensure that the mold is firmly fixed to avoid movement or deformation during use.

4. Adjust bending parameters: According to the material you want to bend and the required Angle, adjust the parameters of the bending machine, such as pressure, speed, Angle, etc. These parameters can be fine-tuned according to the material type and thickness to ensure the bending results meet the requirements.

5. Test fold: Before the formal bend, make a test fold to ensure that the setting is correct. Select a piece of material that is similar to the actual workpiece, observe the bending results during the test folding process and make adjustments.

6. Formal bending: After confirming that the setting is correct, the workpiece to be bent is placed on the bending machine, and the bending operation is performed according to the set parameters. Operate safely and avoid touching moving parts with fingers or other objects.

7. Check the bending result: After the bending is completed, check whether the bending Angle and shape obtained meet the requirements. If you need to adjust, you can fine-tune it according to the actual situation.