How to use aluminium bending

1. Preparation:

   - Select the appropriate aluminium material and bending die to ensure that the material is clean and free of impurities and corrosion.

   - According to the required bending angle and size, measure the length of the aluminium using a measuring tool (e.g. ruler) and cut it with scissors.

2. Bending process:

   - For simple right-angle or acute-angle bends, use aluminium bar clamps to hold the part to be bent in place.

   - For more complex bending shapes, it may be necessary to use a professional bending machine, and according to the design requirements to determine the bending angle, bending radius and bending position.

3. Calculation of bending parameters:

   - In the bending process, it may be necessary to consider the thickness of the material, the length of the bending edge, bending coefficient and other factors. The specific calculation formula may vary depending on the choice of lower die and plate thickness.

4. Note:

   - The extent to which the aluminium plate can be bent depends mainly on the state of the material, which is divided into full hard, semi-hard and soft states . Different states may have an effect on the bending effect.

   - When carrying out bending operations, safety norms should be followed to avoid hand contact with sharp edges and to ensure that the work area is tidy to prevent slipping or injury.